.
Ils parlent de nous !
Excellent site, produits aux meilleurs prix, envoi ultra rapide, je recommande!! +++...
Arnaud Beaugeard
Particulier
j’ai enfin monté la ligne by TPMS ! Et c’est vraiment une tuerie ! Bravo à vous...
Steven MiLon
Particulier
j'ai correctement réceptionné ma commande, super emballage antichoc et pièce impeccable...
Phil Berth
Particulier
List of products by brand AIRTEC
AIRTEC front mount intercooler for the new Audi TT 225 comes with hard pipes, silicone hoses and fitting instructions.
Registered Design Right number: 6023257
AIRTEC part no: ATINTVAG14
AIRTEC have now released our latest intercooler for the AUDI TT RS (8J). We take a huge amount of pride in making sure our kits are finished to an extremely high standard.
Please note, the original Audi crash bar will need modifying to fit this intercooler upgrade. If you feel your DIY skills are up to the job, this can be cut yourself. Or we can supply a pre-modified crash bar for a charge of £295.
AIRTEC part number: ATINTVAG19
AIRTEC intercooler for the BMW 135i, 335i and E89 Z4 35i (N54)
This upgraded AIRTEC intercooler was seeing an average of 36 degrees with an increase of around 17bhp.
Having the intercooler keep air temperatures down means a proven increase in power.
Registered Design Right number: 6023245
AIRTEC part no: ATINTBMW2
Designed to work with remapped ECU for best results
Finished In Pro-Series Satin Black or Nautral Silver
Removes restrictive OE Vauxall Intercooler, which suffers from heat soak on tuned cars.
AIRTEC part no: ATINTVAUX8
AIRTEC has released their Corsa E 1.4T front mount intercooler. Removes restrictive OE Vauxall intercooler, which suffers from heat soak on tuned cars.
Designed to work with re-mapped ECU for best results
Finished in Pro-Series Satin Black or Natural Silver
Registered Design Right number: 6023249
AIRTEC part no: ATINTVAUX9
Natural Silver finish only. Complete with twin fans and fitting kit. You can still fit grill and spot lights No drilling required, comes with adjustable side brackets which bolt onto the side of the intercooler then bolt onto back of front bumper using existing studs on bumper.
AIRTEC part no: ATINTFO4
Great addition to any standard or re-mapped Abarth 500's. Fast Turbo spool up by using 50mm pipe-work into the turbo and 60mm out of the turbo to help match the throttle body, this combination gives fast turbo spool up and maximum power output
Registered Design Right number: 6023445
Hose colours shown for illustration purposes only.
AIRTEC part no: ATINTFT1
Great addition to any standard or re-mapped 595's
Fast Turbo spool up by using 50mm pipe-work into the turbo and 60mm out of the turbo to help match the throttle body, this combination gives fast turbo spool up and maximum power output.
Will fit any Abarth with Garrett GTI446 Turbo.
AIRTEC part no: ATINTFT3
AIRTEC's intercooler for the 1.6 Diesel Fiesta Mk7 PRE-FACELIFT AND FACELIFT
The proven vertical 50mm core, runs top to bottom of the end tanks, this gives the single pass design intercooler the shortest route for the charged air to pass though, with such a small turbo, the faster the charged air can get in & out the better.
AIRTEC Part No: ATINTFO36
AIRTEC front mount intercooler for the Focus ST MK3 Diesel.
Designed to keep air shutters in place, to prevent cooling fans running on.
Intercooler made to order, please allow 7-10 days.
Approximate dimensions:
Width 936mm
Height 160mm
Thickness 'core' 70mm
Registered Design Right number: 6022639
AIRTEC part no: ATINTFO43
AIRTEC has now added a great addition to its range of products in the way of this intercooler for the MK5 Golf GT, with the 1.4-litre TSI engine, we can offer a sure way to improve on the charge air cooling, by using the AIRTEC intercooler.
Great addition to any standard or remapped 1.4 twin-charged Golf Mk5.
Please note: If running Golf GTI fog surrounds, no cutting is required.
AIRTEC part no: ATINTVAG24
AIRTEC has added a great addition to its growing range of performance intercoolers, in the way of this upgraded intercooler for the VOLKSWAGEN, Golf Mk6, 2.0-litre Common Rail diesel.
Please note: This intercooler will only fit the 2.0-litre CR engine and not the PD engine.
Great addition to any standard or remapped Golf.
Hoses shown for illustration purposes only.
AIRTEC part no: ATINTVAG21
AIRTEC Motorsport front mount intercooler upgrade for the Hyundai I30N.
This freer-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up.
It features a stepped twin-core (160mm and 70mm) design for maximum frontal area in the limited space provided behind the bumper. Together with high-flow, moulded one-piece cast end tanks, the AIRTEC intercooler offers much greater efficiency and volume over standard.
AIRTEC Motorsport front mount intercooler for Land Rover Discovery 2.
Features AIRTEC high impact core to prevent off road damage!
Now fits cars with air-con
Will NOT fit automatic gearbox versions - manual transmissions only
AIRTEC part no: ATINTLR01
Available in motorsport finish silver and pro-series black for the ultimate stealth look.
Please note: This intercooler will not fit the JCW
Registered Design Right number: 6023250
AIRTEC part no: ATINTMINI05
Please note: Made to order, please allow 7-10 days before dispatch.
AIRTEC front mount intercooler now available for the Mini GP3.
Available in motorsport finish silver and pro-series black for the ultimate stealth look.
AIRTEC part no: ATINTMINI08
AIRTEC front mount intercooler now available for the Mini JCW F56.
Available in motorsport finish silver and pro-series black for the ultimate stealth look.
Registered Design Right number: 6023446
AIRTEC part no: ATINTMINI06
AIRTEC has now added a great addition to it's growing range of performance intercoolers, in the way of this upgraded intercooler for the Mitsubushi Colt CZT.
Huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger intercooler.
Registered Design Right number: 6022641
AIRTEC part number: ATINTMITS01
AIRTEC Motorsport are proud to introduce our new front mount intercooler upgrade for the Mitsubishi Evolution Lancer 8.
Finished in our Natural Silver finish and complete with 2 Pro Hoses in optional Gloss Black or Performance Blue, this kit comes with everything ready for an easy bolt on install.
AIRTEC Part Number: ATINTMITS03
AIRTEC huge front mount intercooler for MK3 Focus RS.
The Airtec intercooler is the only off the shelf intercooler that uses a 100mm deep core! We use this core only in the most extreme coolers, we name the 100mm core 'GobStopper' due to it's amazing cooling properties.
AIRTEC part no: ATINTFO44
Finished in Pro-Series Black or Natural Silver
AIRTEC full width intercooler design ensures maximum airflow to intercooler without blocking top of radiator unlike other manufactures designs.
Registered Design Right number: 6022643
Finished in Pro-Series Satin Black or Natural Silver
Removes restrictive VW Intercooler & pancake set up for high flow, single pass 60mm core design
Rolling Road Tested to give a 12bhp increase on a Stage 1 car (only a remap installed) Tested @ AmD Tuning in Essex
Please note, above test results were taken from a Seat Cupra R rolling road testing, it using the same intercooler as the AIRTEC 1.8T intercooler kit, which means you will get the same great results!
AIRTEC part no: ATINTVAG13
AIRTEC are proud to introduce the front mount intercooler upgrade for the Mk6 Fiesta 1.6 diesel TDCI.
Designed to fit all 1.6 diesel models.
PLEASE NOTE: This intercooler kit will require trimming to the bumper and radiator cradle.. But its worth it!
Hose colour shown for illustration only.
AIRTEC part no: ATINTFO45
This huge Intercooler will reduce those much needed ACT's (Air Charge Temperatures) and help increase power and save fuel due to the original ford intercooler being to small to cope!
Please note: Only available in Pro-Series Black!
With Diesel tuning becoming more popular in the Ford scene Airtec turned its attention to the Mk4 Mondeo, with a quick re-map it can be a good car, add an bigger Intercooler and it becomes an even better car.
With Diesel tuning becoming more popular in the Ford scene AIRTEC turned its attention to the Mk4 Mondeo, with a quick re-map it can be a good car, add an bigger Intercooler and it becomes an even better car.
AIRTEC Motorsport front mount intercooler kit for the R35 GT-R, dedicated to offering the best cooling solution to suit up to Stage 4.5 modified GT-Rs.
Designed in-house at AIRTEC HQ in the UK, the comprehensive kit offers upgraded cooling, comes with all fittings and fixtures and uses the car's original mounting points to ensure an easy, direct fit that requires no cutting, drilling or modification.
Hose colour shown for illustration purposes only.
Registered Design Right number: 6049894
AIRTEC part no: ATINTNIS01
Finally an affordable option for your Polo Gti and Ibiza 1.8 Turbo
Kit includes all necessary parts requied to complete this front mount conversion
Huge Seat Sport twin-pass style intercooler with bigger 60mm core
AIRTEC part no: ATINTVAG6
Airtec has released their Renault Clio RS Front Mount Intercooler to its growing range of performance intercoolers, reasonably priced but high quality alternative from cheap nasty Ebay kits & more than capable of doing the same if not better job than more expensive Intercoolers, we take a huge amount of pride in making sure our kits are finished to an extremely high standard.
Great addition to any standard or re-mapped Clio's.
AIRTEC part no: ATINTREN5
Comes with full-fitting kit and instructions included, fitting takes 1 -2 hours. Only basic tools required.
Airtec's latest creation is this intercooler for the Ford S Max 2.5 Turbo Petrol, they have now changed the total design with new high flow 60mm core and angled flowed end tanks, which in turn has increased power, torque & also lowered ATC Temps.
Finished In Pro-Series Satin Black or Silver
Removes restrictive twin Intercooler set up for high flow single pass 60mm core design, retains standard crash bar.
Rolling Road Tested '12bhp increase in BHP' on a stage1 car (only remap installed) Tested @ AMD Tuning Essex
The Airtec 150 Diesel intercooler upgrade for the Seat Leon Mk1 150PD uses our very popular Cupra R Intercooler which is capable of 400bhp, the kit comes complete with full alloy boost pipe kit, custom made silicon hoses and coolant Rad pack brackets that secure the radiator and Air-con radiator in place 'the standard intercooler secure these in place as standard'
For that complete Front mount intercooler look and with added BHP.
AIRTEC Front Mount Intercooler Conversion for Diesel PD130
Skoda VRS
Ibiza Mk4
Polo 1.9
AIRTEC part no: ATINTVAG5
Give your Adam S the AIRTEC treatment
Removes restrictive OE Vauxall Intercooler, which suffers from heat soak on tuned cars.
Registered Design Right number: 6023243
AIRTEC part no: ATINTVAUX11
AIRTEC has now added a great addition to its range of products in the way of this intercooler for the Astra Mk6 J 1.4 Turbo, we can offer a sure way to lower your charge tempertures.
Registered Design Right number: 6030022
Hose colours shown for illustration purposes only.
AIRTEC part no: ATINTVAUX13
AIRTEC has now added a great addition to its range of products in the way of this intercooler for the Astra Mk6 J 1.6 Turbo, we can offer a sure way to lower your charge temperatures
AIRTEC part no: ATINTVAUX6
AIRTEC has now added a great addition to it's growing range of performance intercoolers, in the way of this huge front mount for the Astra J VXR.
Great upgrade to any standard or remapped Astra J VXR.
Registered Design Right number: 6023464
Hose colour shown for illustration purposes only.
AIRTEC part no: ATINTVAUX5
AIRTEC Motorsport front mounted intercooler for the Volvo C30 T5.
HUGE 90mm core - Tested and proven to lower intake temps!
Will also fit: Volvo V50 T5, S40 and C30 T5
Registered Design Right number: 6022636
AIRTEC part no: ATINTVOL1