.
Ils parlent de nous !
Excellent site, produits aux meilleurs prix, envoi ultra rapide, je recommande!! +++...
Arnaud Beaugeard
Particulier
j’ai enfin monté la ligne by TPMS ! Et c’est vraiment une tuerie ! Bravo à vous...
Steven MiLon
Particulier
j'ai correctement réceptionné ma commande, super emballage antichoc et pièce impeccable...
Phil Berth
Particulier
RS
ST
Ported and polished to get the maximum out of your modified ST or RS
Professionally ported to remove the rough original casting for faster flowing intake gases, which = more power & torque, expect to see gains from 5-15bhp & 8-20ftlb of torque depending on spec.
AIRTEC Motorsport oil breather top plate for Focus MK2 ST & RS.
Billet CNC machined plate designed to replace the stock oil breather housing.
This kit allows you to replace the original plastic top and replace it with the AIRTEC Motorsport oil breather housing top.
Reduce gear changes by up to 30% faster gear change = Faster car!
- Billet alloy construction with stainless steel ball end
- Reduce gear changes by up to 30%
- Easy DIY job, takes approximately 10-15 minutes to install
- Fits both ST & RS models
- Comes with full fitting instructions
Finally an off the shelf way to fit a Race Tow Strap, no bumper removal and then never using it because your to scared it may crack your bumper due to being bolted in a incorrect towing position.
Thread available on its own, or with the optional tow strap.
AIRTEC part no: ATMSFO40
Replacement bushes to fit the Focus Mk2 /Mk3 torque mount.
Yellow - Fast Road
Purple - Track and race
Black - Ultimate performance track and race
694.8 BHP ROLLING ROAD TESTED!! AIRTEC Stage 2 Intercooler & the market leading 2.5″ big boost pipe kit makes it a must upgrade for your 400 BHP Focus RS (Rolling road recorded unofficial 733 bhp/650 lbft, but moved on rollers @ end of run)
If running big turbo conversion this intercooler will go up to 500bhp
Silicon hose kits available in Black, Blue, Red, Orange and Ultimate Green.
Registered Design Right number: 6022645
AIRTEC part no: ATINTFO50
AIRTEC Stage 1 intercooler upgrade and big boost pipe package for Mk2 Focus RS. 60mm intercooler and 2.5″ bore pipework, ideal for cars running over 400 bhp.
Choose from Natural Silver or Pro-Series Black and a range of silicone hose colours.
AIRTEC part no: ATINTFO49
For those wanting BIG power from their Mk2 Focus ST or RS, there's now an off-the-shelf solution in the form of this direct fit tubular exhaust manifold which allows a huge range of aftermarket turbos to be fitted.
The Ultimate Boost hose upgrade for your FRS Mk2
Made with thick 5-ply layer design and gives possibly the thickest silicone hoses available.
Best value for money boost hose kit available.
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Frozen Wh
Stage 2 AIRTEC CAIS was designed for 400 BHP.
Currently being used on several 500 BHP Focus RS MK2s!
AIRTEC part no: ATIKFO14
K&N dry charger sock now available @ an additional £32.95 inc vat.
Exhaust blowing? Missing downpipe bolts due to performance increases? Stage 8 Locking bolts has the answer to all these problems, their effective active mechanical locking systems prevent even a single degree of fastener loosening rotation 'No more missing bolts'.
Part no: ASEXHDSB1
Its been tested Independently tested By Fast Ford Magazine
And we also did our own tests on Jamsports 546bhp with amazing results!
694.8 BHP ROLLING ROAD TESTED!! AIRTEC Stage 2 Intercooler & the market leading 2.5″ big boost pipe kit makes it a must upgrade for your 400 BHP Focus RS (Rolling road recorded unofficial 733 bhp/650 lbft, but moved on rollers @ end of run)
Registered Design Right number: 6022645
AIRTEC part no: ATINTFO18
AIRTEC Stage 3 is the only off the shelf intercooler that uses a 100mm deep core! we use this core only in the most extreme coolers, we name the 100mm core 'GobStopper' due to it's amazing cooling properties
Every Stage 3 Intercooler comes with a 70mm cold side hose, if you have a big boost pipe kit fitted, your Hot side pipework will still fit.
AIRTEC part no: ATINTFO23
Replacement Pro Hoses for Focus ST Stage 3 intercooler.
Designed to fit 2.5″ intercooler outlets.
Please note: For Focus ST 225 - MUST be fitted with 2.5″ intercooler outlets. Standard ST intercooler has 2″ outlets
AIRTEC part no: PH/BOSFO17
Turbo to crossover hose for the Focus RS Mk2.
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange,
Now available for the Focus RS Mk3. Pro Hoses are proud to offer this three-piece boost hose kit.
Available in a varity of colours: Gloss Black, Frozen White, Bright Blue, Race Red, NITROUS BLUE + More!
Now available for the Focus RS MK3. Pro Hoses are proud to offer this two-piece coolant hose kit.
Available in a variety of colours: Gloss Black, Frozen White, Bright Blue, Race Red, NITROUS BLUE + More!
Please note: Custom colours are made to order, please expect a 5-10 day delay on custom colours.
Peak show times may be a longer 7-10 day delay.
Direct replacement for the three main hoses that are seen in the engine bay
Designed to visually exceed original OEM rubber hose design
5-ply layer design, a must for standard and modified Focus RS models
Now available for the Focus RS Mk3. Pro Hoses are proud to offer this two-piece induction hose kit.
Available in a variety of colours: Gloss Black, Frozen White, Bright Blue, Race Red, NITROUS BLUE + More!
Why not replace that grooved Ford plastic intake hose, for a stronger and easily better looking Pro Hoses, takes minutes to fit and looks great!
Gloss Black, Race Red, Performance Blue normally kept in stock, please allow 3-5 working days for delivery.
Other colour hoses, made to order
Replacement Pro Hoses for the Stage 2 Focus RS Mk2 Carbon Fibre Airbox CAIS or Mountune / Standard Airbox.
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange,
Direct replacement for the top symposer hose Left hand side of the camcover, Known as the pipe.
Designed to visually exceed original OEM plastic grooved hose design
5 ply layer design, a must for standard & modified FRS's
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to o
Very possibly the Ultimate oil cooler kit available for the Focus Mk2 ST & RS
Earl's TEMP-A-CURE™ Grill mounted oil cooler to achieve maximum cold airflow and fits either side of grill as not to affect cold air feed for air filters
The easiest way to fit a dump valve to your ST225 or RS Mk2
Available in a variety of colours.
Accepts Bailey and all other dump valves
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange,
The AIRTEC 'Race' oil cooler kit is comprehensive and every part is finished to a extremely high level of quality
Designed for RS owners pushing the limits, serious Fast Road & Track use
AIRTEC part no: ATOILFO3
Heat treated for 36 hours & then Pressure tested to 56 psi approximately 4 bar of pressure to ensure maximum strength
Available in Gloss Black, Frozen White or Collorado Red.
We are pleased to announce we supply a 12.5mm metal push fitting with every AIRTEC manifold.
In stock, our stunning Performance Inlet manifolds painted in the following colours to match your car - Ultimate Green, Performance Blue, Electric Orange.
We are pleased to announce we supply a 12.5mm metal push fitting with every AIRTEC Motorsport manifold.
Registered Design Right number: 6041778
Pro Hoses hot side boost hose upgrade for Mk2 Focus (ST/RS)
See description for differences between the available hose options
Gloss Black, Race Red, Performance Blue normally kept in stock, please allow 3-5 working days for delivery.
Other colour hoses, made to order
Another great addition to your Focus RS Mk2, 4-pce ancillary hose kit from Pro Hoses
Exceeds OEM design and quality, available in 10 colours
Focus MK2 ST / RS header tank hoses, made by Pro Hoses.
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange,
Purple, Vivid Pink, Ultimate Green
Replacement hose kit for AIRTEC Motorsport Two-Piece Breather System.
Made by Pro Hoses.
Part no: PH/BREFO1
