.
Ils parlent de nous !
Excellent site, produits aux meilleurs prix, envoi ultra rapide, je recommande!! +++...
Arnaud Beaugeard
Particulier
j’ai enfin monté la ligne by TPMS ! Et c’est vraiment une tuerie ! Bravo à vous...
Steven MiLon
Particulier
j'ai correctement réceptionné ma commande, super emballage antichoc et pièce impeccable...
Phil Berth
Particulier
A full atmospheric BOV for racers and serious enthusiasts who want to be noticed. Supersonic provides a superior flow performance with the famous Supersonic sound. Featuring a tool-free adjustment via a rotating cap and a positive-seal piston this is Turbosmart loudest BOV.
A full atmospheric BOV for racers and serious enthusiasts who want to be noticed. Supersonic provides a superior flow performance with the famous Supersonic sound. Featuring a tool-free adjustment via a rotating cap and a positive-seal piston this is Turbosmart loudest BOV.
Redesigned from the ground up, the new Vee Port PRO is 20% smaller and 33% lighter than its predecessor. Featuring a hard anodised aluminium piston, the new Vee Port PRO offers high flow capabilities in a lighter, more compact package. Some applications my require a BOV Adaptor or fitting. Please check the applications tab for part numbers. SUPPLIED WITH: 38mm hose / weld-on adaptor, V-Band clamp, 360 degree swivel vacuum fitting.
Redesigned from the ground up, the new Vee Port PRO is 20% smaller and 33% lighter than its predecessor. Featuring a hard anodised aluminium piston, the new Vee Port PRO offers high flow capabilities in a lighter, more compact package. Some applications my require a BOV Adaptor or fitting. Please check the applications tab for part numbers. SUPPLIED WITH: 38mm hose / weld-on adaptor, V-Band clamp, 360 degree swivel vacuum fitting.
Valve Position Sensor to fit the new range of Turbosmart Wastegate Sensor Caps.
Sensor fits both styles of wastegate sensor cap (Locking Collar and 6 Bolt), Sensor Plug sold separately (TS-0502-2009).
Plug to suit the new Turbosmart Wastegate Position Sensor.
Please note: Sensor sold separately.
Tool - C Spanner designed for use with the Locking Collar system as found on Turbosmart Ultra-Gate38 (38mm), Comp-Gate40 (40mm) and Hyper-Gate45 (45mm) External Wastegates inc HP Gates.
Part Number: TS-0550-3013
Wastegate position sensor caps allow tuners to monitor exact wastegate valve positions and tune accordingly. Wastegate valve position monitoring is allowing racers to get the absolute maximum performance out of their motors.
Wastegate position sensor caps allow tuners to monitor exact wastegate valve positions and tune accordingly. Wastegate valve position monitoring is allowing racers to get the absolute maximum performance out of their motors.
Wastegate TURBOSMART 45 Hyper-Gate45 HP 35psi Black
Wastegate TURBOSMART 45 Hyper-Gate45 HP 35psi Blue
AIRTEC Motorsport Front Mount Intercooler for VW Transporter T5 / T6.
Developed in house at AIRTEC Motorsport HQ, our uprated intercooler solution to suit the Transporter T5 / T6 offers a much larger capacity core and is finished with CAD designed, smooth cast end tanks to ensure increased flow and maximum cooling efficiency.
AIRTEC part no: ATINTVAG40
Freshly developed at AIRTEC HQ in the UK, we're proud to launch our Stage 3 front mount intercooler kit with integrated crash bar aimed at modified Audi TTRS 8s owners who want the very highest level of cooling efficiency, power and performance for track or fast road use.
AIRTEC Part No: ATINTVAG39
AIRTEC Motorsport Stage 2 Front Mount Intercooler for Audi TTRS 8S.
Available only in Pro-Series Black and either with or without a pre-modified crash bar.
AIRTEC Part No: ATINTVAG38
Pro Hoses Symposer Hose for Hyundai I30N.
Available in Gloss Black, Performance Blue, Race Red.
Optional stainless jubilee clips available.
Part No: PH/SYMHYU1
Freshly developed at AIRTEC Motorsport HQ in the UK, we are proud to launch our front mounted intercooler for the Audi RSQ3 8U with integrated crash bar design (Replaces the stock crash bar).
Aimed at modified RSQ3 owners who want the very highest level of cooling efficiency, power and performance for fast road or track use.
AIRTEC Part No: ATINTVAG37
AIRTEC Motorsport DCT Transmission Cooler for BMW M2 Comp, M3 & M4
The dual clutch transmission equipped on the BMW F platform, doubled with the performance the M cars provide, can cause a lot of heat being applied to the transmission.
AIRTEC Part No: ATTCBMW1
Please note: Made to order, please allow 7-10 days before dispatch.
AIRTEC front mount intercooler now available for the Mini GP3.
Available in motorsport finish silver and pro-series black for the ultimate stealth look.
AIRTEC part no: ATINTMINI08
Keep it AIRTEC and represent with our luggage tag key ring, finished in black with grey embroidered AIRTEC logo.
Make sure to tag @AIRTECMotorsport in your social media posts.
AIRTEC Part No: ATMER35
AIRTEC Motorsport Hot Side Boost Pipes for BMW M3, M4 and M2 Comp
With improved flow and increased strength over the original plastic items, our hot side boost pipes link the turbos to the chargecooler and are suited to modified BMW M3, M4 and M2 Competition models for track or fast road use.
Registered Design Right number:
AIRTEC part number: ATINTBMW
AIRTEC Motorsport Induction Kit for the Fiat 500
Developed in-house at AIRTEC HQ in the UK, this induction kit is specifically designed to suit the 1.4-litre turbocharged Fiat 500.
Registered Design Right number:
AIRTEC part no: ATIKFT1
AIRTEC Motorsport Enlarged Cast Alloy High Flow Throttle Body Elbow for Mk8 Fiesta ST (also fits Focus Mk4 1.5 ST-Line).
Designed to replace the restrictive OEM pipe, this larger elbow connector offers increased flow.
Direct replacement item for a simple installation.
Registered Design Right number: 6093149
AIRTEC Part No: ATMSFO108
AIRTEC Motorsport Fiesta MK8 ST 1.5 EcoBoost Engine Breather.
Essential upgrade for any direct injection car, the oil catch can is designed to collect oil and moisture passing through the vacuum system, minimising the build up of carbon on the back of the inlet valves.
Only available in Pro-Series Black!
Registered Design Right number:
Clubsport by AutoSpecialists have designed and released a bolt in rear cage for the FiestaMK8 ST 1.5 & 1.0 EcoBoost - NO drilling or cutting required.
Registered Design Right number:
AIRTEC part no: ASCCAGE6
Easy fitting! removes stock airbox and comes with everything required to give your Focus ST225 that Turbo wastegate chatter!
Great addition to your ST, Fits all Pre-Face lift and Face lift models Deep induction note & lots of waste gate chatter No worrying about water ingress on low level filters, which is a concern for some ST owners.
AIRTEC Part No: ATIKFO30
AIRTEC Motorsport Focus Mk2 Two-Piece ECU Holder
Made from high-quality, injection-moulded plastic and finished in smooth satin black, it looks and feels very similar to the genuine Ford item but at far less cost.
Part no: ASCOV1
AIRTEC Motorsport Twin Oil Breather Kit for Mk3 Focus ST/RS
Developed and manufactured at AIRTEC HQ in the UK, we're proud to launch our twin oil breather kit suitable for modified or standard Mk3 Focus ST and RS models.
The package features a machined billet baffle plate to replace the original Positive Crankcase Ventilation (PCV) plate and valve set that features extra baffles to decrease the amount of oil that is able to enter the intake system.
It also features take-offs for one or two external oil breather tanks to further help reduce crankcase pressure and carbon build-up that can plague these engines.
AIRTEC Motorsport Downpipe Bracket for Focus Mk3 ST/RS - in partnership with BRC Performance.
Our precision CNC-machined alloy bracket is a direct replacement that offers more support for the downpipe and exhaust system.
It features two heat resistant silicone bush inserts to provide a more rigid mounting and permanently reduce flex.
Registered design right number: 6093147
AIRTEC part no: ATMSFO107
AIRTEC Motorsport induction kit that works perfectly with the standard or modified Mk4 Focus ST 2.3 EcoBoost.
Enhanced induction sound, great looks and loud turbo noise on let off.
AIRTEC Motorsport front mount intercooler upgrade for the Hyundai I30N.
This freer-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up.
It features a stepped twin-core (160mm and 70mm) design for maximum frontal area in the limited space provided behind the bumper. Together with high-flow, moulded one-piece cast end tanks, the AIRTEC intercooler offers much greater efficiency and volume over standard.
Adding to our growing range of performance parts, AIRTEC Motorsport are proud to introduce our big boost pipe kit suitable for the Hyundai I30N.
Featuring a larger diameter, freer-flowing design, the boost pipes allow increased air flow.
AIRTEC part no: ATMSHYU5
AIRTEC Motorsport Enlarged Alloy High Flow Induction Elbow for Hyundai i30N
Designed to replace the restrictive OEM pipe, this 10mm larger silicone elbow and alloy connector offers increased flow.
By reducing restriction within the induction system, air flow improves and potential power increases can be released.
The elbow is carefully engineered to be a direct replacement item, which ensures a simple installation process and comes with a gloss black Pro Hoses silcone hose, as well as all fixtures and fittings.
To suit AIRTEC I30N induction kit.
Registered Design Right number: 6093143
AIRTEC part no: ATIKHYU2
Pro Hoses Six-Piece Coolant Hose Kit for Hyundai I30N.
A 6 PIECE hose kit available in 3 different colours, choose from Gloss Black, Performance Blue, Race Red.
Optional stainless jubilee clips.
Part number: PH/COLHYU1
Pro Hoses induction hose for Mini R56 Cooper S.
To replace the stock intake hose, for a smoother air flow.
Please check location of breather hose before purchasing, make sure the outlet is in the same location.
Part No: PH/INDMINI2
AIRTEC Motorsport Induction Kit for the Mini GP3.
Developed in-house at AIRTEC HQ in the UK, this kit is specifically designed to suit the turbocharged 2.0-litre petrol engine that comes fitted as standard to the latest Mini GP3.
The kit is a direct replacement that requires no additional drilling or cutting to fit.
AIRTEC Part No: ATIKMINI03
AIRTEC Motorsport are proud to introduce our new front mount intercooler upgrade for the Mitsubishi Evolution Lancer 8.
Finished in our Natural Silver finish and complete with 2 Pro Hoses in optional Gloss Black or Performance Blue, this kit comes with everything ready for an easy bolt on install.
AIRTEC Part Number: ATINTMITS03
Pro Hoses turbo to intake hose for EA888 2.0 TSI MQB engine.
Designed to replace the stock induction hose and turbo elbow on the 1.8 and 2.0 TSI engines with the IHI turbo. A single hoses with CNC connector to fit directly to the turbo, which allows for a smother airflow, improving throttle response and an increase of power.
Part Number: PH/INDVAG8
IWG75 Ford Focus ST / XR5 2.5L Turbo 7psi
Ford Focus ST Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures.
Please note: Pictures are library pictures and may not relate to actual product.
AIRTEC part no: TS-0941-1010