.
Ils parlent de nous !
Excellent site, produits aux meilleurs prix, envoi ultra rapide, je recommande!! +++...
Arnaud Beaugeard
Particulier
j’ai enfin monté la ligne by TPMS ! Et c’est vraiment une tuerie ! Bravo à vous...
Steven MiLon
Particulier
j'ai correctement réceptionné ma commande, super emballage antichoc et pièce impeccable...
Phil Berth
Particulier
FOCUS MK1
Insert de silentbloc POWERFLEX de boîte de vitesses "Black Series"
Support moteur inférieur AIRTEC pour Ford Focus ST RS
Durite AIRTEC 2.5" COLD SIDE BOOST PIPE pour FORD FOCUS RS MK2
Insert de support moteur POWERFLEX avant droit
Insert de silentbloc POWERFLEX de boîte de vitesses
AIRTEC Group A Cone Filter with Alloy Trumpet for Mk2 Focus RS
AIRTEC Motorsport Focus MK2 ST Downpipe & De-cat package.
The kit includes, AIRTEC high quality decat and downpipe, all required gaskets and bolts.
Made to a high quality standard and all tubing is finished in brushed stainless steel.
AIRTEC part no: ATEXHFO2
Ford Focus RS 2.5L Turbo Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Focus RS IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.
AIRTEC Motorsport de-cat.
Allows exhaust gases to flow much faster, More power!
Expect more popping & deeper aggresive exhaust sound. Gain 10bhp + (depends on spec of your car)
This part is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks.
AIRTEC Motorsport Focus MK2 ST and RS 3″ Downpipe.
AIRTEC Motorsport downpipe includes downpipe, gaskets and bolts
Made to a high quality standard and all tubing is finished in brushed stainless steel.
AIRTEC part no: ATEXHFO3
AIRTEC Motorsport now brings you the 2.5″ big boost pipe kit.
Complete kit only £295 includes stainless jubilee clips and fixings.
AIRTEC part no: ATMSFO63
AIRTEC now brings you the 2.5″ big boost pipe kit with the larger 70mm cold side hose
Please note: For Focus ST 225 - MUST Be fitted with 2.5″ outlets on intercooler. Stock ST is 2″.
Will NOT fit Focus ST Stage 1/2 intercooler. WILL fit Focus ST Stage 3 intercooler.
AIRTEC part no: ATMSFO55
AIRTEC Motorsport 3.5″ downpipe for Focus MK2 ST/RS.
The AIRTEC Motorsport 3.5″ downpipe reduces down to a 3″ flange to fit the stock cat / aftermarked de-cat or sports cat.
Can be easily cut and modified to fit a larger flange.
Registered design right number:
AIRTEC part number: ATEXHFO9
This hose will fit to a standard size throttle body expanding up to 70mm though the rest of the hose to then connect to most brands of intercooler with 63mm outlet including the standard OEM intercooler.
AIRTEC part no: ATMSFO33
Reduces parasitic loss, removes unwanted weight and de-clutters the engine bay.
Please note: This is recommended for Motorsport use only and is not intended for road use.
The new cast manifold comes with the large T3 flange and can accommodate many different turbos and power outputs
The only manifold choice when looking for a genuine 500+bhp and a NO CRACKING guarantee 3 year warranty (conditions apply)
Ford Focus Mk2 Facelift Bonnet Lifter Kit
This kit is an extremely easy modification to make to your Focus,Replace the stock bonnet prop with the bonnet lifter kit .
Designed for Focus Mk2 facelift models
Kit includes:
2 x Gas-charged struts
2 x Bonnet hinge brackets
2 x Wing brackets
AIRTEC part no: ATMSFO43
Focus RS MK2 Group A Cold Air Feed which is designed to work with all Group A Open filters. Supplies a cold air feed directly into the Group A Filter Improving and maximising the airflow and performance.
Ported and polished to get the maximum out of your modified ST or RS
Professionally ported to remove the rough original casting for faster flowing intake gases, which = more power & torque, expect to see gains from 5-15bhp & 8-20ftlb of torque depending on spec.
AIRTEC Motorsport oil breather top plate for Focus MK2 ST & RS.
Billet CNC machined plate designed to replace the stock oil breather housing.
This kit allows you to replace the original plastic top and replace it with the AIRTEC Motorsport oil breather housing top.
Reduce gear changes by up to 30% faster gear change = Faster car!
- Billet alloy construction with stainless steel ball end
- Reduce gear changes by up to 30%
- Easy DIY job, takes approximately 10-15 minutes to install
- Fits both ST & RS models
- Comes with full fitting instructions
Finally an off the shelf way to fit a Race Tow Strap, no bumper removal and then never using it because your to scared it may crack your bumper due to being bolted in a incorrect towing position.
Thread available on its own, or with the optional tow strap.
AIRTEC part no: ATMSFO40
Replacement bushes to fit the Focus Mk2 /Mk3 torque mount.
Yellow - Fast Road
Purple - Track and race
Black - Ultimate performance track and race
694.8 BHP ROLLING ROAD TESTED!! AIRTEC Stage 2 Intercooler & the market leading 2.5″ big boost pipe kit makes it a must upgrade for your 400 BHP Focus RS (Rolling road recorded unofficial 733 bhp/650 lbft, but moved on rollers @ end of run)
If running big turbo conversion this intercooler will go up to 500bhp
Silicon hose kits available in Black, Blue, Red, Orange and Ultimate Green.
Registered Design Right number: 6022645
AIRTEC part no: ATINTFO50
AIRTEC Stage 1 intercooler upgrade and big boost pipe package for Mk2 Focus RS. 60mm intercooler and 2.5″ bore pipework, ideal for cars running over 400 bhp.
Choose from Natural Silver or Pro-Series Black and a range of silicone hose colours.
AIRTEC part no: ATINTFO49
For those wanting BIG power from their Mk2 Focus ST or RS, there's now an off-the-shelf solution in the form of this direct fit tubular exhaust manifold which allows a huge range of aftermarket turbos to be fitted.
The Ultimate Boost hose upgrade for your FRS Mk2
Made with thick 5-ply layer design and gives possibly the thickest silicone hoses available.
Best value for money boost hose kit available.
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Frozen Wh
Stage 2 AIRTEC CAIS was designed for 400 BHP.
Currently being used on several 500 BHP Focus RS MK2s!
AIRTEC part no: ATIKFO14
K&N dry charger sock now available @ an additional £32.95 inc vat.
Exhaust blowing? Missing downpipe bolts due to performance increases? Stage 8 Locking bolts has the answer to all these problems, their effective active mechanical locking systems prevent even a single degree of fastener loosening rotation 'No more missing bolts'.
Part no: ASEXHDSB1
Its been tested Independently tested By Fast Ford Magazine
And we also did our own tests on Jamsports 546bhp with amazing results!
694.8 BHP ROLLING ROAD TESTED!! AIRTEC Stage 2 Intercooler & the market leading 2.5″ big boost pipe kit makes it a must upgrade for your 400 BHP Focus RS (Rolling road recorded unofficial 733 bhp/650 lbft, but moved on rollers @ end of run)
Registered Design Right number: 6022645
AIRTEC part no: ATINTFO18
AIRTEC Stage 3 is the only off the shelf intercooler that uses a 100mm deep core! we use this core only in the most extreme coolers, we name the 100mm core 'GobStopper' due to it's amazing cooling properties
Every Stage 3 Intercooler comes with a 70mm cold side hose, if you have a big boost pipe kit fitted, your Hot side pipework will still fit.
AIRTEC part no: ATINTFO23
Replacement Pro Hoses for Focus ST Stage 3 intercooler.
Designed to fit 2.5″ intercooler outlets.
Please note: For Focus ST 225 - MUST be fitted with 2.5″ intercooler outlets. Standard ST intercooler has 2″ outlets
AIRTEC part no: PH/BOSFO17
Turbo to crossover hose for the Focus RS Mk2.
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange,
Now available for the Focus RS Mk3. Pro Hoses are proud to offer this three-piece boost hose kit.
Available in a varity of colours: Gloss Black, Frozen White, Bright Blue, Race Red, NITROUS BLUE + More!
Now available for the Focus RS MK3. Pro Hoses are proud to offer this two-piece coolant hose kit.
Available in a variety of colours: Gloss Black, Frozen White, Bright Blue, Race Red, NITROUS BLUE + More!
Please note: Custom colours are made to order, please expect a 5-10 day delay on custom colours.
Peak show times may be a longer 7-10 day delay.
Direct replacement for the three main hoses that are seen in the engine bay
Designed to visually exceed original OEM rubber hose design
5-ply layer design, a must for standard and modified Focus RS models
Now available for the Focus RS Mk3. Pro Hoses are proud to offer this two-piece induction hose kit.
Available in a variety of colours: Gloss Black, Frozen White, Bright Blue, Race Red, NITROUS BLUE + More!