.
Tasked with controlling how much boost the Focus's turbo is allowed to produce, the wastegate plays an integral role in the turbo system. However, the Focus's standard actuator does not let the Focus reach its full potential, even at standard boost pressures.
OEM wastegate actuators tend to use soft springs, which begin to open long before peak boost is reached.
AIRTEC huge front mount intercooler & big boost pipe kit for Focus RS MK3.
The AIRTEC intercooler is the only off the shelf intercooler that uses a 100mm deep core, combined with our 2.5″ big boost pipe kit this is a must have upgrade for improved performance on the MK3 Focus RS.
AIRTEC part no: ATINTFO51
AIRTEC huge front mount intercooler for MK3 Focus RS.
The Airtec intercooler is the only off the shelf intercooler that uses a 100mm deep core! We use this core only in the most extreme coolers, we name the 100mm core 'GobStopper' due to it's amazing cooling properties.
AIRTEC part no: ATINTFO44
AIRTEC Motorsport downpipe de-cat for Focus MK3 RS.
The Original Catalyst and down pipe , unlike the older ST225 and Focus RS mk2, are made in one piece. This new design features some restrictive bends and an exit bore size of only 55mm.
AIRTEC part no: ATEXHFO6
Airtec Tubulure d'admission pour Focus RS MK2
K&N 57s filter element only, is supplied with a rubber bung which once removed increases waste gate turbo chatter noise! It can be easily replaced if you require a quieter driving experience.
Lot de 5 Injecteurs Bosch 750 cc pour Focus RS MK2
AIRTEC now brings you the big boost pipe kit for the Mk3 Focus RS.
Our 2.5″ big boost pipe kit is a must have for a high powered Mk3 Focus RS.
Registered Design Right number: 6022646
AIRTEC part no: ATMSFO81
Echangeur frontal Airtec stage 2 pour Ford Focus RS MK2 - boost pipe 2.5
AIRTEC Motorsport rear diff cooler.
Designed to lower temperatures of the rear differential, AIRTEC Motorsport are proud to offer a rear diff cooler for the Mk3 Focus RS.
Available in a choice of Nitrous Blue, Pro Series Satin Black or Motorsport Satin silver.
Comes with complete fitting kit ready to fit.
Registered Design Right number 6016419
AIRTEC Radiateur Aluminium "Upgrade" for Focus Mk2 RS
AIRTEC Motorsport sound suppressor for Focus RS MK3.
Designed to stop the MK3 RS 'whistle' on idle or light throttle openings. The AIRTEC Motorsport sound suppressor is designed to cancel out this whistle. This is done by simply removing the standard part and replacing it with AIRTEC's sound suppressor.
AIRTEC Motorsport induction pipe for the Focus Mk3 RS
Optional extra 2 piece silicone hose kit.
Reservoir liquide de Refroidissement alu AIRTEC pour Focus ST et RS mk2
This is a billet aluminium replacement arm for the heavy stock cast iron unit. Has 4 pivot point choices plus two of which moves the shifter forward 25mm.
Gets rid of the heavy stock shifter feel. Give your shifter a speedy feel with notchy positive shifts and more mechanical connection to your car.
AIRTEC part no: ATMSFO3
With the Focus RS MK3 Tuning being taken to new power levels, there is a real need for upgrading the oil cooler from standard!
AIRTEC Motorsport are proud to offer the oil cooler kit for the Focus RS MK3.
Now available the stage 2 induction kit for the Focus RS Mk3.
The new design stage 2 induction kit that works perfectly with the standard Focus RS Mk3.
Expect to see gains of 5-10bhp compared to the original air box.
Enhanced induction sound, great looks and loud recirculation dump valve noise on let of, only £295.00!
Registered Design Right number: 6033433
Clubsport by AutoSpecialists Two-Piece Front Brake Disc Set Up for Focus RS Mk3.
When it comes to upgrading a brake disc set up, due to either general wear and tear or purely for improved performance, our Clubsport two-piece set up is the perfect option.
The simple, bolt-on application is designed to directly replace the standard front brake discs and massively increase overall braking performance.
Comes fully assembled!
AIRTEC part no: ASCDISC3
Now available for the Focus RS Mk3. Pro Hoses are proud to offer this 16-piece ancillary hose kit.
Available in a variety of colours: Gloss Black, Frozen White, Bright Blue, Race Red, NITROUS BLUE + More!
AIRTEC kit durites silicones refroidissement focus RS MK2
Transform that boring Engine bay with a set of Pro Hose coolant kit available with stainless clips, a wide range of colours & available from stock
Labelled with the Pro-Hose seal of Quality
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Frozen White, B
Filtre a huile déporté AIRTEC pour Focus RS et ST MK2
Pompe immergée AIRTEC 340 l/heure pour Focus RS MK2
Focus ST250 RS style air box.
Genuine Ford Focus MK3 RS air box which acts as a direct fit to replace the standard air box in the ST250. Comes with optional extras including a genuine K&N 57 S performance filter and Pro Hoses silicone induction hose.
NO TRADE DISCOUNT AVAILABLE ON THIS ITEM
Ford Focus ST 2.0L Ecoboost Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the ecoboost IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.
AIRTEC Motorsport downpipe de-cat for Focus MK3 ST250
This part is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks.
AIRTEC part no: ATEXHFO5
AIRTEC big boost pipe kit for the Mk3 Focus ST.
2.5″ big boost pipe kit, a must have for high powered MK3 Focus ST's.
Please Note: Pipework only available in silver.
AIRTEC part no: ATMSFO74
A great addition to your 2012 Eco Boost ST 2012
Available in a variety of colours Gloss Black, Bright Blue, Frozen White, Vibrant Red & Tangerine Scream. Choose with or without Dump valve outlet.
Please note:
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Pro Hose brings you another World leading quality hose kit, this 7 piece ancillary kit is available in various colours
Please note:
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange,
Purple, Vivid Pink, Nitrous Blue, Ultimate Green, Nitrous Blue
Please allow 2-4 weeks for delivery.
IWG75 Ford Focus ST / XR5 2.5L Turbo 7psi
Ford Focus ST Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures.
Please note: Pictures are library pictures and may not relate to actual product.
AIRTEC part no: TS-0941-1010
Focus ST225 Group A Cold Air Feed which is designed to work with all Group A Open filters. Supplies a cold air feed directly into the Group A Filter Improving and maximising the airflow and performance.
Pro Hose brings you another World leading quality hose kit, this 2 piece coolant kit is available in various colours
Please note:
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange,
Comes with high voltage warning logo & information logo. Made from stainless steel, not alloy like other cheaper, over priced covers!
Polished silver or Pro-Series Black finish
Finished in Pro-Series Black or Natural Silver
Dyno proven - Our AIRTEC ST made 294.3bhp with AIRTEC Intercooler, AS Performance intake & AutoSpec/Mongoose cat back exhaust system.
AIRTEC part no: ATINTFO22
Pro Hose brings you another World leading quality hose, this 2 piece symposer hose upgrade is available in various colours
Please note:
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Frozen White, Bright Yellow, Grey, Kawasaki Gree