.
Ils parlent de nous !
Excellent site, produits aux meilleurs prix, envoi ultra rapide, je recommande!! +++...
Arnaud Beaugeard
Particulier
j’ai enfin monté la ligne by TPMS ! Et c’est vraiment une tuerie ! Bravo à vous...
Steven MiLon
Particulier
j'ai correctement réceptionné ma commande, super emballage antichoc et pièce impeccable...
Phil Berth
Particulier
Sous-catégories
FIESTA MK1 / MK2
FIESTA MK5
FIESTA MK6
A direct replacement part that offers increases in performance and response, as well as sound and aesthetics, the enlarged induction pipe features a smoother design with less bends to hinder airflow and an increase in overall internal volume to reduce restriction and improve flow to the turbo.
Turbosmart Ford Fiesta ST Internal Wastegate Actuator
The Turbosmart wastegate actuator range has been designed as a stronger, more reliable replacement for OEM parts. Like all Turbosmart parts, billet construction means they are stronger and more durable than a stock actuator, while Turbosmart's focus on performance means boost comes on faster and holds on longer.
Big boost pipe kit for the Fiesta ST 180 & ST200
Pro Series black pipes only.
Reduce your stock shift throws with two different positions, ranging from 15% (Lower hole) or 25% (Top hole). Offering 2-positions truly allows the user more options to fine tune their shift throws!
Fits Fiesta ST 180 and Focus MK3 1.6.
Registered Design Right number 6030030
AIRTEC Motorsport boost gauge kit for Fiesta ST 180.
The AIRTEC Motorsport Fiesta MK7 boost gauge kit, supplied with Turbo Smart Boost Gauge in PSI or BAR.
A simple modification with a OEM look.
AIRTEC part no: ATMSFO23
AIRTEC Motorsport brake cooling guides for the Fiesta MK7.
Designed to stop brake fade and spongy pedal.
Registered Design Right number 6016420
AIRTEC Motorsport cold side boost pipe to fit Fiesta ST180/ST200
Please note, this item is a symposer DELETE only.
AIRTEC part no: ATMSFO78
With the Fiesta ST180 tuning being taken to new power levels, there is a real need for upgrading the oil cooler from standard!
AIRTEC Motorsport are proud to offer the oil cooler kit for the Fiesta ST180.
AIRTEC Part No:
AIRTEC Motorsport 3″ Decat
Allows exhaust gases to flow much faster. More Power!
Expect more popping and a deeper exhaust note. Gain up to 10+ bhp (Depending on your car)
AIRTEC part no: ATEXHFO7
AIRTEC Motorsport lightweight alloy header tank for Fiesta MK7 ST180 - Complete with sight glass!
No drilling required, uses original fixing points and is a direct replacement of the original Ford plastic header tank.
AIRTEC part no: ATMSFO89
AIRTEC Motorsport hot side boost pipe designed to fit specifically with the Turbo Technics S242 hybrid turbo for the Fiesta ST180.
Kit includes x 1 hard pipe, x 1 Pro Hose silicone hose joiner and stainless jubilee clips.
AIRTEC part no: ATMSFO76
AIRTEC Motorsport Hot Side Lower Boost Pipe for Fiesta ST 180
Designed to improve air flow by increasing the pipe size and removing any restrictions.
AIRTEC Motorsport Fiesta ST 180 MAF housing to suit the AIRTEC Stage 2 and Stage 3 induction kits.
AIRTEC Motorsport torque mount and quick shift package for Fiesta Mk7 ST180.
Special Package Deal - Purchase our extremely popular AIRTEC uprated torque mount and our AIRTEC uprated quick shift together for the discounted price of only £150!
Part no: ATMSFO20 / ATMSFO24
AIRTEC Motorsport oil catch can for Fiesta ST180.
Essential upgrade for any direct injected car, the oil catch can is designed to collect oil and moisture passing through the vacuum system, preventing a build up of carbon.
One of the only kits designed with a dipstick allowing you to check your oil level!
AIRTEC part no: ATMSFO83
AIRTEC Motorsport Rear Wing for Mk7 Fiesta
The kit attaches to the using our bespoke AIRTEC Motorsport designed brackets, that is bolted to the bootlid.
Please note, this requires drilling and should be done by a competent professional.
Key features:
• Designed and developed in the UK
• Tested on track and road with our own Time Attack car
• Bespoke laser-cut and powdercoated alloy brackets
• Unique alloy end plates available in three powdercoated colours
• High-quality fibreglass centre blade section finished in satin black
• Comprehensive fitting kit with all fixtures, fittings, instructions and drilling template
Available in a choice of coloured end plates:
Gloss Black
Race Red
Frozen White
Replacement bushes to fit the AIRTEC Motorsport Fiesta ST180 torque mount
Yellow - Fast road
Purple - Track and race
Black - Ultimate performance track and race
AIRTEC Motorsport spoiler lifter kit to fit Fiesta Mk7 ST180.
An easy DIY install, takes 10-15 minutes to fit.
AIRTEC part no: ATMSFO44
AIRTEC Motorsport stage 2 induction kit for Fiesta ST 180 complete with Pro Hoses silicone induction hose upgrade.
Purchase together and save £24.55!
Only available with cotton filter.
AIRTEC Motorsport Fiesta ST 180 / ST200 symposer delete. Designed to delete the sound symposer on the MK7 Fiesta ST, eliminating the additional engine noise directed into the car's cabin.
A must have modification for cars running stage 3 or above.
Machined from billet aluminium, this simple DIY modification is a simple solution that allows you to hear the natural engine and exhaust sounds of your car, without the enhanced cabin noise.
Easy install using the vehicles original fittings.
Will fit both ST180 and ST200 1.6 EcoBoost.
AIRTEC Part No:
AIRTEC Fiesta ST 180 top induction pipe.
Replace your standard Fiesta ST 180 plastic top induction pipe with our AIRTEC motorsport alloy top pipe.
Available in Pro-Series Black or Satin Silver.
Can be fitted with our stage 2 induction kit.
As Performance billet torque mount to fit the Fiesta 1.0 EcoBoost, ST180, ST200 & Fiesta ST150
Our torque mount delivers on every level, from quality, price and usability.
AIRTEC Motorsport turbo induction elbow for Fiesta ST 180.
Direct replacement of the stock turbo induction pipe. Only company supplying with a gasket.
Please note: Will not fit with Turbo Technics turbo
AIRTEC Part no: ATMSFO71
AIRTEC's intercooler for the ST180 has proved to be a great upgrade on re-mapped cars, the 70mm thick core has been rolling road tested to bring down the intake temps from 152 degrees to a very low 39 degrees, 'That's a 102 degree reduction in intake temperature'
If the ECU sees over 50 degrees it will back power off for engine safety, the AIRTEC intercooler keeps the temps low enough so you keep all your power.
As fitted to our 235bhp ST180 Demo car
Registered Design Right number: 6023241
AIRTEC part no: ATINTFO25
Stage 2 induction kit is now on sale! Cold feed, Billet alloy maf sensor fitting, powder coated heat-shield and huge extreme filter
Expect to see gains of 5-10bhp compared to the original Airbox.
Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off.
The new design Stage 2 induction kit that works perfectly with the standard Fiesta.
Registered Design Right number: 6033435
AIRTEC has now taken the Intercooler on the ST180 to a whole new level, with the step core design offering a 85mm thick lower section and a 40mm thick upper section 'The Double Decker' the intercooler has been design for cars running hybrid turbo's and big turbo conversions where fitted.
If the ECU sees over 50 degrees it will back power off for engine safety, the AIRTEC intercooler keeps the temps low enough so you keep all your power.
Registered Design Right number: 6023251
AIRTEC part no: ATINTFO26
Our stage 3 induction kit for the ST180 is now available.
Now comprising of more hard pipes and less silicone hoses meaning even less restriction with the air flow.
Available with a selection of hose colours and comes complete with all screws ready to be fitted.
Will fit Fiesta ST 200
Registered Design Right number: 6033435
Pro Hose performance hose kit for the Ford Fiesta ST 180. Kit includes 12 ancillary/breather hoses.
Manufactured in the UK.
Available in a variety of colours.
Fiesta MK7 Zetec S Coolant Hose Kit
Made by Pro - Hoses.
Please note:
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange,
Pro Hose performance hose kit for the Ford Fiesta ST 180. Kit includes 2 coolant/radiator hoses.
Manufactured in the UK.
Available in a variety of colours.
Pro Hose performance silicone hose kit for the Ford Fiesta MK7 Zetec S. Kit includes one induction hose.
Manufactured in the UK.
Available in a variety of colours.
Tested! rolling road tested @ Amd in Essex, Peak power gain of 7.5bhp and average overall increase of 4-6bhp over 5 power runs.
Pro Hose brings you another World leading quality hose, this Induction hose upgrade is available in the following colours
Bring your Fiesta ST180 Eco Boost engine bay to life with Pro-Hose, the Professional choice
Pro Hose performance hose kit for the Ford Fiesta ST 180. Kit includes 6 turbo/intercooler hoses.
Manufactured in the UK.
Available in a variety of colours.
AIRTEC Motorsport & Pro Hoses brings you another world leading quality product. This induction hose upgrade is available in a variety of colours.
Bring your Fiesta ST180 EcoBoost engine bay to life with Pro Hoses 2 pce induction hose, the professional choice.
AIRTEC Motorsport induction shield only for Fiesta MK7, 1.0 EcoBoost & 1.6 ST180.
Comes supplied with all fixings needed to fit.
Powder coated in pro series black finished with AIRTEC logo.
AIRTEC's intercooler for the 1.6 Diesel Fiesta Mk7 PRE-FACELIFT AND FACELIFT
The proven vertical 50mm core, runs top to bottom of the end tanks, this gives the single pass design intercooler the shortest route for the charged air to pass though, with such a small turbo, the faster the charged air can get in & out the better.
AIRTEC Part No: ATINTFO36
Fiesta MK7 Zetec S Ancillary Hose Kit.
Made by Pro - Hoses.
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange,